MOT-F series used for materials in roll & piece:
Multifunction rotary heat press with a working table for roll and piece production, designed for transfer printing, direct-ink reactivation and lamination workflows.
Use the MOT-F when your production needs both continuous roll handling and cut-piece loading on one rotary heat press platform. Share your material, working width and expected output so Eastsign can review the suitable configuration.
x
Leave a Message
The current Eastsign product page describes the MOT-F as available for both roll and piece materials. The final table, shaft and collection configuration should be checked against the actual production workflow.
The current page lists transfer printing, direct-ink reactivation and lamination. Material compatibility and operating conditions should be confirmed for each process before purchase.
The current product page describes a working table. Confirm its final dimensions and layout in the latest technical documentation and quotation.
Provide the material type, fiber composition, transfer paper or ink system, working width, roll or piece format, expected output, available power and workspace.
The MOT-F is positioned for roll and piece workflows and includes a working-table arrangement. A dedicated roll-to-roll machine is organized around continuous roll production. The better option depends on the percentage of roll versus piece work and the required material-handling layout.
No assumption should be made from a general feature list. The current page marks the blanket off-tracking alarm and some roll-collection functions as optional. Confirm all included and optional items in the final quotation.
1. Double-layer oil drum, 100% full oil: Surface heat treatment, non-Teflon coating.
2. The cylinder is heated by heating elements and hydrotreated mineral oil, with an extra oil tank to hold thermally expanding heating oil.
3. Blanket coverage at 70%.
4. Overheated alarm on temperature controller(+10℃).
5. Solid state relay for heating control.
6. Carbon brush slip ring: ease of maintenance.
7. Precise temperature control.
5 air expansion shafts and a one-inch roller.
Entry: One- or three-inch steal roller for roll fabric loading and manual biaxial tension bar control.
Exit: Air expansion shaft with disk brake with manual adjustment.
Independent motor for rewinding, adjustable by speed controller.
Entry: Air expansion shaft with disk brake with manual adjustment.
Exit: Air expansion shaft with disk brake with manual adjustment.
Independent motor for rewinding, adjustable by speed controller.
Entry: Air expansion shaft with disk brake with manual adjustment.
And manual biaxial tension bar control.
Exit: Air expansion shaft with disk brake with manual adjustment.
Independent motor for rewinding, adjustable by speed controller.
1. Easy button-operated control panel.
2. Blanket auto centering system:
Omron timer & limit switch control and parameters adjustable on timer.
3. Blanket off tracking alarm system. #Optional feature.
4. Auto power off: One-key automatic shutdown
Controlled by timer, auto cooling off and power auto off.
5. Equipped with a working table, 2m in length.
6. Available for both roll and pieces materials printing.
7. 3 unwinding and 2 rewinding shafts.
Printed fabric takes up in front of the working table.
#Roll fabric rewind as an optional feature.
8. The diameter of the roll printing materials can be 20~30cm.
9. Pneumatic felt tension and transfer pressure control.
10. Conveyor belt speed is synchronized with the working speed of oil drum.
11. Valid for 30 gsm printing paper.
12. The machine runs at full power during the heating up procedure, it takes about 60 minutes. Then power consumption will stay at 70~80% during production.
13. Oiler for oil drum load bearings lubrication.
14. Foot platforms beside the working table included for the 800mm oil drum machine.
Compressed air pressure: 0.6Mpa maximum.
Felt tension at 0.2Mpa maximum.
HS CODE: 8443.3990.00
Eastsign is one of the leading suppliers of digital printing media and equipment for all types of signage applications, offering a comprehensive product line.
In recent years, Eastsign has specialized in transfers, covering equipment, transfer paper and polyester fabrics. Whether you are looking to expand your production, enter a new customized market or upgrade your facility, Eastsign is here to support you.
The MOT-F is a multifunction rotary heat press with a working table for businesses that need to handle both roll materials and cut pieces. The current configuration is designed for transfer printing, direct-ink reactivation and lamination workflows, subject to the material, ink and process requirements of each application.
Unlike a production line dedicated only to continuous rolls, the MOT-F combines rotary heat transfer with a table-based area for loading and handling individual pieces. Its material-feeding, tension and pressure systems can be evaluated for production environments that switch between roll and piece work.
If you are comparing different machine types, start with Eastsign’s rotary heat press machine overview. For an MOT-F recommendation, send your fabric type, transfer paper or ink system, required working width, material format and expected output.
The MOT-F is intended for production teams that want one rotary heat press platform for both continuous material and piece-by-piece work. It may be considered when a workflow includes rolls for continuous transfer and pre-cut pieces that need to be loaded from a working table.
The current product page identifies three principal process directions:
Transfer printing with transfer paper and compatible materials
Direct-ink reactivation under confirmed process conditions
Lamination for materials and applications approved for the selected configuration
Final suitability depends on the fabric or substrate, fiber composition, ink or transfer-paper system, working width, operating conditions and required material-handling method. Eastsign should confirm the application before the final configuration is selected.
The MOT-F can be evaluated for polyester-based transfer workflows used in sportswear, apparel, flags, soft signage and home-textile production. These examples describe application directions, not a guarantee that every fabric or product can be processed with the same settings.
Before confirming an application, review:
Fabric or substrate type and fiber composition
Transfer paper, printed fabric or direct-ink process
Roll material, cut pieces or a mixed workflow
Maximum required working width
Expected hourly or daily output
Required feeding and collection arrangement
Available electrical supply, compressed air and floor space
Test requirements for color, transfer consistency and material behavior
Natural fibers, coated materials and special laminates require process-specific confirmation. Do not assume that a material is suitable only because it fits within the machine width.
Not sure whether the MOT-F fits your production line? Send Eastsign your fabric or substrate details, transfer paper or ink system, working width, roll or piece workflow and expected output. The team can review the application requirements and discuss a suitable configuration.
→ Ask About the MOT-F for Your Application
Request A Quote Today
Please do not hesitate to contact us to get the high quality products and our best service. Eastsign keep here to provide our best!
RELATED PRODUCTS
